Wonkometer

Wonky van? Not anymore. The Wonkometer tells you exactly how much to raise each wheel — before you've even got the ramps out. No bubble-squinting. No drive-on-drive-off-drive-on again. Just a level van, first time.

You know the feeling

You've arrived. The kettle's calling. But the pitch has other ideas — the fridge won't run properly, the bedroom's on a slope, and you're lying in bed slowly rolling into your partner. Again. So out come the ramps: drive on, jump out, squint at a bubble, not quite, drive off, adjust, repeat. There's a better way, and it takes about thirty seconds.

Level in three steps

1. Fit it once. Mount the Wonkometer sensor anywhere dry inside your van and calibrate with one tap on level ground. Setup done — forever.
2. Pull onto your pitch. Open the free app — it connects automatically over Bluetooth.
3. Do what it says. "Raise left by 9cm." Put the ramp in, drive on, and the app confirms when you're perfectly level. Kettle on.

It does the maths so you don't have to

Every other level gadget tells you that you're wonky. The Wonkometer tells you what to do about it — in centimetres, per wheel. Tell the app your wheel distance once and it converts tilt angle into exact ramp height. One drive onto the ramp. Level, every time.

Campervan, motorhome, caravan or trailer

Choose your vehicle in the app — campervan, motorhome, caravan or trailer — and the Wonkometer shows your actual setup, side to side and front to back. Same little sensor, every kind of wonk.

What's in the box

• Wonkometer Bluetooth sensor
• Mounting screws
• Quick-start guide

Specs

• Connectivity: Bluetooth to the free Wonkometer app (iOS & Android)
• Power: 12v or USB powered
• Size & weight: [CONFIRM]
• Accuracy: tilt measured to within 1°
• Water resistance: none — the sensor isn't waterproof, so fit it in a dry spot inside the vehicle
• Warranty: 12 months
• Made by: SavvyVan, UK

Questions? Wonk no further — read the FAQs. Fitting it? The user guide has you covered.